8-SENSOR CCD WHEEL ALIGNMENT SYSTEM
The comprehensive system offers eight wireless and robust camera CCD sensors with lightweight wheel clamps to support a four-wheel alignment system. The design is state-of-the-art electronics with efficient software to align the vehicle without any excessive key-closures. Efficiency coupled with a flexible alignment path reduces time spent on vehicle.
This CEMB wheel alignment system will save you time, efficiency, and labor. View the enhanced specs below and contact us today! ARGOS Inspired Software & Design 30+ Year Vehicle Database 24.5” Clamping Range Industrial Computer WiFi Antenna Ergonomic Design
Includes:
Rim Clamps
Grips/Pins
Brake Pedal Depressor
Steering Wheel Holder
Bungie Cord
Optional:
Vin Code Scanner
Turn Plates
Slip Plates
Wheel Clamp Extensions
Pin Plate Adapter
2 piece cone truck kit
Pneumatic Wheel Lift
Accessory Rack
- Upgraded Wireless Bluetooth2 communication uses long-lasting rechargeable Lithium Ion batteries.
- Eight Camaera CCD sensor design uniquely offers front and rear cross-toe views to align even the lowest vehicles with ground effects packages when front cross toe beam is blocked.
- Choice of compensation modes provides rolling compensation or raised compensation on service extended wheel base vehicles unable to roll on shorter alignment racks.
- Lightweight wheel clamps quickly attacch to rims without damage. Extension pins are included to attach clamps to offset wheels. Options extension kit extends wheel clamp diamer to 30"
- Extensive 40+ year vehicle database included vehicle-specifi adjustment illustrations and customization capability.
Lightweight wheel clamps and robust sensors make up this eight camera CCD wheel alignment system!
Designed with state-of-art electronics and efficient software designed to quickly align the vehicle without excessive key-closures and move onto the next vehicle.
Flexible set up allows the operator to choose the alignment path.
Choice of compensation modes provides rolling compensation or raised compensation to service extended wheel base vehicles unable to roll on shorter alignment racks.
Extensive 40+ year vehicle database includes vehicle specific adjustment illustrations and customization capability.
Optional VIN barcode scanner specification entry.
Eight sensors uniquely offer front and rear cross toe views to align even the lowest vehicles with ground effects packages.
CEMB alignment software offers multi-language capability and customized configuration choices installed on Windows® based lap top platform w/ 24” TFT LCD monitor, printer, cabinet and wheel clamp storage. Sensor communication is wireless and uses a robust USB Bluetooth 2 interface powered by long lasting rechargeable Lithium Ion rechargeable batteries.
Wheel clamps quickly attach to rims up to 24” diameter. Extension pins included to attach clamps to offset wheels.
Optional extension kit extends wheel clamp diameter to 30”.
Power Supply 110VAC Shipping Dimensions L58" X W43" X H85" Gross Ship Weight 350 lbs Features: - 8 Sensor CCD Technology
- DSP Processing
- 4 shock resistant BT2 wireless rechargable alignment heads with charging station come standard
- Featherweight alignment heads. Only 5.75 lbs each
- Lithium ion batteries for long life
- MEMS Static accelerometers provide the latest in measuring technology (newest measuring technology)
- 24" wheel clamping range (30" optional)
- Optional VIN barcode scanner
- Laptop computer and storage cabinet standard
- Windows based software with multiple languages
- Spoiler mode
- Complete vehicle and customer database with alignment specification 40+ years
- User friendly software to guide technician
- Color Printer
- 24" LCD Monitor
- 110VAC, 50/60 Hz, 1ph
If you are searching for an affordable computer wheel alignment system, consider the Cemb DWA1000XL from North American Auto Equipment.
The Cemb DWA1000XL is an economically priced computer wheel alignment system that offers 8 sensor CCD technology for accurate measurements.
This wheel aligner is a machine intended for measuring the characteristic angles of motor vehicles, in particular, the camber, toe- in and caster.
Measuring Heads:
The measuring heads included in this system are made up of CCD transducers to measure the horizontal angles and accelerometers to measure the vertical angles. In the cable version, both the power supply and data transmission is via cable. In the radio version, power is supplied by rechargeable batteries; when the batteries are flat, measurements can still be made by connecting the battery charge cables (supplied as an option and not included in the standard equipment package) to the measuring heads.
Data transmission is via radio.
To turn on the DWA measuring heads, connect the power cables or, only for the radio models, press any key on the keypad.
The great thing about our DWA1000XL measuring heads, is the fact that they turn off automatically after about fifteen minutes if no data is transmitted or the cabinet is off.
Level indicators make leveling the head simple. Red/Green/Red LED Indicators are utilized with green verifying that you are level.
Brake Pedal Lock: Our standard brake pedal lock is used to lock the brakes while preparing to make a measurement.
Steering Wheel Lock: Our standard Steering lock is used to hold the steering wheel in a fixed position; it is positioned before carrying out the vehicle adjustment operations.
Battery and communication status is very important when the measuring heads are communicating with the computer. For simplification and operator convenience, our DWA1000XL comes standard with color coded icon indicators taking away the guess work and simplifying the trouble shooting process for the technician, thereby increasing productivity as well as profitability.
The color of the battery icons indicates the status of the radio connection and the battery charge:
Light blue: Battery recharging or almost fully charged
Green: Battery charged
Yellow: Battery low; estimated operating time 60 minutes
Red: Battery flat, estimated operating time 30 minutes
Grey: No communication
Black: rear measuring head not used in the 2 measuring heads mode
To save time and avoid moving between the vehicle and the cabinet, you can move between the pages using the measuring head keypads.
The home page appears at the beginning of each alignment procedure. From this page you can select the car and truck alignment procedure, as well as measuring mode with 2 or 4 measuring heads. You can also access the settings or the customer databank pages.
The measuring mode with 2 measuring heads allows measuring and adjusting only the toe-in and camber of the front axle.
Preparing for measurement could not be easier:
1.) Position the vehicle on the turnplates
2.) Mount the wheel clamp and measuring heads in the vehicle wheels
3.) Turn on the computer
4.) Turn on the measuring heads
From Home Page:
F1 Switch between the car or truck procedure
F2 Switch between the mode with 2 or 4 measuring heads
F3 Menu: F1 settings(Databank) page F2 Customer Data Bank (customer information and vehicles measurement stored previously)
F4 Goes directly to measurement without selecting vehicle
The vehicle selection pages allows selecting a vehicle so that during adjustment you can compare the measurements with the manufacturer's specifications and display the adjustment help images. The vehicle is selected first by manufacturer and then by model. For faster selection of the model you can display only the models registered as of the year indicated. You can also insert information on a customer which are saved in the databank together with the summary of the measurements so that can be viewed and printed later.
|
